Inhaltsverzeichnis; English - Ring Contact Sensor Schnellstartanleitung
Inhaltsverzeichnis
Table of contents
2
Contact Sensor
3
First, complete the in-app setup
5
1. Make sure your Ring Alarm is disarmed.
6
2. In the Ring app, tap Set Up a Device and find the
Contact Sensor in the Security Devices menu.
8
3. Follow the in-app instructions to complete setup.
9
Then, install the device in your home
11
1. Choose the door or window where you'd like
12
to install your Sensor and magnet. If you have a
narrow doorway, use the included Slim Magnet
14
instead.
2. Line up the Sensor and magnet, with no more than
15
12.7mm (1/2") between them.
17
3. Clean the area, then peel the backing from the
mounting tape and press the Sensor and magnet
into place.
If you're using the Contact Sensor on a door you use
often, choose Main Door as the placement option. Main
doors have Entry and Exit Delays to prevent you from
accidentally triggering the alarm.
English
3
Inhaltsverzeichnis
