Gebrauchsanleitung
Instructions for use play bed ELIYAS
Das Bett sollte von 2 Personen aufgebaut werden.
Wichtig!
BittelesenSiedieGebrauchsanleitung
den Wam-und
Sicherheitshinweisen
des Bettes sorgfältig durch und bewahren Sie diese
danach
auf.
Die Gebrauchsanleitung beinhaltet darüber hinaus
eine Montageanleitung mit einer Stückliste, sowie die
notwendigen Werkzeuge für einen sicheren Zusam-
menbau
Ihres
Bettes.
Warn-
und
Sicherheitshinweise:
1. Achten Sie beim Zusammenbau
dass die Verbindungselemente fest angezogen wer-
den. Die Verbindungselemente müssen auch wäh-
rend des Gebrauchs
auf Ihren festen
werden.
2. Die horizontale Kerbe in dem Bettpfosten
(Seite 8/8) kennzeichnet die maximale Matratenhö-
he. Diese Kennzeichnung muss bei innenliegender
Matratze
weiterhin
zu sehen
sicher.
Die empfohlene Matratzengröße ist 900 x 2000mm.
Die max. Matratzenhéhe beträgt 170 mm
3. Das Bett darf nicht benutzt werden, wenn ein Bau-
teil fehlt Odergebrochen ist.
4. Hochbetten und das obere Bett von Etagenbetten
daff von
Kindern
unter
6 Jahren
Es besteht eine Verletzungsgefahr beim Herunterfal-
5. Folgende Gegenstände dürfen nicht am Bett
befestigt Oder angehängt werden: Stricke, Schnüre,
Kordeln, Gurte, Bänder etc. Es besteht Strangulations-
gefahr!!
6. Achten Sie darauf, dass das Etagen- OderHochbett
immer mit der Wand in Berührung sein muss. Falls
dies nicht möglich ist, darf der Abstand zwischen der
Oberkante der Absturzsicherung und der Wand höchs-
tens 75 mm betragen Oder der Abstand muss größer
sein
als 230
mm.
Pflegehinweis:
DasBettdarfnurmiteinem
feuchten Lappen gereinigt werden.
Das Bett entspricht der DIN EN 747-1:2007
- ID. Kennung; Spielbett ELIYAS
- ID. NO. KSfcod-
- Massivholz
Buche
Spielbett ELIYAS
vor dem Aufbau
des Bettes darauf,
Sitz kontrolliert
sein.
Dann
bleibt
Ihr Bett
nicht
benä
werden!!
11
Q
Relita
ntspricht d er DINEN747-1undDINEN747-2Ausgabe 20 5
The bed should be assembled by 2 persons.
mit
Important!
Please readtheinstructions w iththe
warnings and safety instructions thoroughly prior to as-
sembly of the bed and retain them carefully for further
reference.
The manual also includes assembly instructions with
part lists and information on the necessary tools for
safe assembly of your bed.
Warning and Safety
1. When assembling the bed take care that the screws
are tightened. The correct position and fixing of screws
must be regularly checked during the use of the bed.
2. The horizontal notch on the bedpost (Page 8/8)
indicates the maximum mattress height. This identi-
fication
must
also
bed, and then your bed is still safe.
The recommended
The max. mattress height is 170mm
3. The bed should not be used if any component is
broken.
4. High beds and the upper bed of bunk beds must not
be used by children under 6 years! There is a risk of
injury for these children when falling off.
5. The following items must neither be attached to
the bed nor suspended: ropes, cords, straps, ribbons,
tapes, etc. There is a risk of strangulation!
6. Make sure that the bunk or high bed is always in
contact with the wall. If this is not possible, the dis-
tance between the top of fall protection and the wann
must not exceed
a maximum
must be greater than 230 mm.
Maintenance:
damp cloth.
The bed is in accordance
- ID. Recognition; High bed LEO
- ID. NO. KS
- Solid
beech
wood
Dr. Woite
GmbH
& co.
Stand 05.04.2018
be visible
with the mattress
mattress
size is 900 x 2000mm.
of 75 mm or the distance
The bed should be cleaned with a
with DIN EN 747-1:2007
11
KG
in the
la/8