Schwaiger ZA 8970 Anschlusshinweise Seite 8

For TVs WiTh BuilT-in DVB-T Tuner
connecTion exAmple
(leFT siDe oF picTure)
powered via built –in DVB-T tuner
» Plug the antenna cable into the antenna jack of the
amplifier. Then connect the cable of the amplifier
to the antenna input of your TV.
» The 5 V power supply must be switched On in the
appropriate menu of the TV set. The power will be
transmitted to the antenna via the coaxial cable.
8
connecTion exAmple
(riGhT siDe oF picTure)
powered via Ac / Dc adapter
» Plug the antenna cable into the antenna jack of the
amplifier. Then connect the cable of the amplifier
to the antenna input of your TV.
» Connect the AC-adapter with the „DC 6 V" jack of
the amplifier and plug the 230 V AC adapter into
a wall outlet.
» Make sure that the 5 V power supply is swiched Off
in the menu of your TV set.