Schwaiger ZA 8970 Anschlusshinweise Seite 10

connecTion in AreAs WiTh sTronG siGnAl
» Plug the antenna cable into the ANT jack of your DVB-T receiver.
» The 5 V power supply must be switched On in the appropriate set up menu of the receiver. The power will be trans-
mitted to the antenna via the coaxial cable.
» Connect the antenna cable with the antenna input jack of your TV set.
» The 5 V power supply must be switched On in the appropriate set up menu of the receiver. The power will be trans-
mitted to the antenna via the coaxial cable.
remArk You can use the antenna with or without amplifier, depending on which connection gives you the
best signal. Using the amplifier provides the best performance in most situations, so try using it first. If you
notice that you have lost channels that can you normally receive, try connecting without power inserter.
10