Technical Specifications - Gardenpoint Jupiter Bedienungsanleitung

Operation
Connect the power cable to a 13 amp supply that is located
in a safe, dry area.
Pull the Switch Cord once, the heater will on
1500W. Pull the Switch Cord twice, the heater
will be off.
Although the patio heater is shower proof, do not use
when raining or in wet conditions.
Always disconnect the power cable from the electrical
supply, when the patio heater is not in use.
MAINTENANCE
Unplug the unit and let it cool completely.
To keep the heater clean, the outer shell may be cleaned
with a soft, damp cloth. You may use a mild detergent if
necessary. After cleaning, dry the unit with a soft cloth.
DO NOT use alcohol, gasoline, abrasive powders,
furniture polish, or rough brushes to clean the heater.
This may cause damage or deterioration to the surface of
the heater.
Although this heater is outdoor approved, DO NOT
immerse the heater in water for your safety.
Wait until the unit is completely dry before use.
STORAGE
If the heater will not be used for a long period of time, store it
in a cool, dry location when not in use. To prevent dust and
dirt build-up, use the original packaging to repack the unit.
TROUBLE SHOOTING
If the heater will not operate, please check the following
before seeking repair of service:
Check if the power cord is plugged into an electrical outlet, if not
plug in.
Check if electricity to the main fuse is working.
Make certain the power switches are turned on. If not, choose a
setting.

TECHNICAL SPECIFICATIONS

Ratings: 220-240V~ 50-60Hz
Power consumption: 1500W
Insulation: class I
WEEE
This product contains recyclable materials. Do not dispose
this product as unsorted municipal waste. Please contact
your local municipality for the nearest collection point.