Samsung PS-WK450 Kurzanleitung Seite 14

INSTALLATION
5. Push a screw (not supplied) through each Holder-Screw, and then screw each screw firmly into a support
screw hole.
6. Use the two Screws (M4 x L14) to attach both Bracket-Wall Mount L and R to the Soundbar's bottom. For a
proper fit, make sure to align the bumps on the Soundbar to the holes on the brackets.
● When assembling, make sure the hanger part of the Bracket-Wall Mounts are located behind the rear of
the Soundbar. See the illustration above.
● The left and right mounts are different shapes. Make sure to position them correctly.
Right end of Soundbar
Wall Mount R
Rear of Soundbar
Wall Mount L
14