4.2 Manual Search
1. You need to configure relevant parameters including:
Frequency(KHz): input relevant digitals to modify it
BandWidth: set it to 6 MHz, 7 MHz, 8 MHz.
2. Start search, press "ENTER" key to start manual scan.
4.3 Channel Filter
Set to search all of channels or only unencrypted channels.
4.4 Country
Select the different country.
4.5 LCN
Set the logical channel number will be searched or not.
4.6 Active antenna
Set the antenna voltage to on or off.
5) CHANNEL
EN - 38