revoltec Fightmouse-elite Bedienungsanleitung Seite 25

(4) DPI & Tools Instruction
The product provides 4 levels resolution switch, and the default is 450 (One Blue LED On) /900
(Two Blue LED On) /1800 (Three Blue LED On) / 3600 (Four Blue LED On). Users can defi ne the own
resolution from 90 dpi ~ 5040 dpi and assign in the specifi c level. Furthermore, the X axle and Y axle
resolution can be set up in individual way by users.
a. Move cursor and select which level DPI needs to
be set up. There are 4 levels can be chosen.
b. Then, move cursor to DPI adjustment area to drag the DPI axis to left or right side, at the meantime,
the DPI is changing. Moving to left side means DPI reducing; on the contrary, moving to right side
means DPI increasing. In this condiction the X axle and Y axle resolution changed at the same time.
Note: The computer will save new resolution into mouse automatically.
Turn off the „proportional bar" in order to setting X axle and Y axle resolution in individual way.
5
Fightmouse-elite_Maunal.indd 25 28.01.2010 14:39:11