Honeywell 022220 Montageanleitung Seite 19

Mounting and Connection Instructions IK2 block lock
4.4 Conversion of the block lock
Bolt length extension
The IK-block lock bolt can be extended with the
corresponding kit from 25 mm to bolt lengths of 35 mm,
50 mm, 55 mm, 65 mm, 80 mm and 100 mm.
Bolt length 35
Bolt length 50
Bolt length 55
Bolt length 65
Bolt length 80
Bolt length 100
Remove the face plate mounted at the factory with
standard screws.
Conversion kit, consisting of:
face plate spacer,
bolt extension,
bolt lock plug
and securing screws,
mount all according to the drawing
Bolt length screw A
50 M4 x 33
65 M4 x 48
35 M4 x 8
55 M4 x 8
80 M4 x 8
100 M4 x 8
Mount special face plate
Remove the fastening screws of the face plate
mounted at the factory. Replace face plate and
fasten with one-way securing screws. Mount the bolt
plate with one-way securing screws.
ATTENTION!
The mounting with one-way securing
screws cannot be undone!
Item-No. 022114.01
Item-No. 022112
Item-No. 022114.02
Item-No. 022113
Item-No. 022114.03
Item-No. 022114.04
.
screw B screw C
M4 x 30 M5 x 65
M4 x 45 M5 x 80
M4 x 14 M5 x 50
M4 x 33 M5 x 70
M4 x 48 M5 x 95
M4 x 48 M5 x 115
Face plate
fixing screw
Bolt cover plate
Bolt extension
Bolt lock
plug
B
C
One-way
securing screw
Face plate spacer
A
A
19