Montage-Anschluss-Anleitung IK2-Blockschloss Sicherheitshinweise Lesen Sie die Anleitung sorgfältig und vollständig durch, bevor Sie das Gerät installieren und in Betrieb nehmen. Das Gerät ist nach dem neuesten Stand der Technik gebaut. Benutzen Sie das Gerät nur: - bestimmungsgemäß und - in technisch einwandfreiem und ordnungsgemäß eingebautem Zustand - gemäß...
Montage-Anschluss-Anleitung IK2-Blockschloss Blockschloss-Einbau Vorgehensweise 1. Zylinderöffnungen im Blockschloss vor Montagebeginn mit Klebeband abdecken. Dadurch wird das Eindringen von Fremdkörpern verhindert. 2. Entsprechende Aussparungen für Blockschloss und Profilhalbzylinder herstellen (Bohrschablone verwenden). Dabei muss darauf geachtet werden, dass an der Unterseite der Öffnung für den Profilhalbzylinder zur Verlegung des Flachbandkabels der Rosette ausreichend Platz vorhanden ist.
Seite 5
Montage-Anschluss-Anleitung IK2-Blockschloss Ausschnitt IDENT-KEY- Türblatt Blockschloss Bohrungen für Rosettenbestigung (Verwendung der Bohrschablone) IDENT-KEY- Rosette Anschlusskabel Achtung! An dieser Stelle ausreichend Platz für Rosetten- Anschlusskabel vorsehen! 5. Rosette sowie Innenschild aufsetzen und Gewindehülsen leicht anziehen. Dann wird der Zylinder durch die Rosette in die Zylinderöffnung des Blockschlosses geschoben Schließnase in Richtung zum Stulp, 90°...
Montage-Anschluss-Anleitung IK2-Blockschloss Einbauhinweise Damit der Blockschlossriegel während der Montage ein - und ausgefahren werden kann, wird die braune Ader an +12 V und die weiße Ader an Masse angeschlossen. Die grüne und die gelbe Ader bleiben unbeschaltet. So wird das Schließen des Blockschlossriegels ohne Anschluss an die Auswerteeinheit ermöglicht.
Seite 7
Montage-Anschluss-Anleitung IK2-Blockschloss Blockschlossumbau Stulp- Befestigungs- Dornmaßverlängerung schraube Das IK-Blockschloss kann mit dem jeweiligen Umrüstsatz von Dornmaß 25 mm auf die Dornmaße 35 mm, 50 mm, 55 mm, 65 mm, 80 mm und 100 mm erweitert werden. Riegel- abdeckplatte Dornmaß Art.-Nr. 022114.01 Dornmaß...
Montage-Anschluss-Anleitung IK2-Blockschloss Blockschlossmontage hinter einer Mehrfachverriegelung (bei Holztüren) In Verbindung mit dem Sonderstulp 16 mm (Art.Nr. 022121 ) kann ein IK-Blockschloss problemlos in einer Tür mit Mehrfachverriegelung eingesetzt werden. Siehe hierzu auch Broschüre "Elektrische Installation von gefahrenmeldetechnischen Anlagen" (P03061-15-000-XX). 20 mm bewegliche Schubstange Blockschloss...
Montage-Anschluss-Anleitung IK2-Blockschloss Anschlusshinweise / Erdung Bitte beachten: Unter der Voraussetzung, dass der Betriebsspannungsverlust von 0,5 V DC (siehe Zeichnung) nicht überschritten wird, kann das IDENT-KEY Blockschloss bis zu 5 m von der Auswerteeinheit entfernt montiert werden. max. 5 m IDENT-KEY Blockschloss Einbruchmelder- Auswerteeinheit...
130 x 25 x 3 mm Schließbartstellung Profilhalbzylinder (je nach Türanschlag) 90° rechts bzw. 90° links Das IK-Blockschloss 022220 entspricht bei bestimmungsgemäßer Anwendung den grund- legenden Anforderungen gemäß Artikel 3 der R&TTE-Richtlinie 1999/5/EG. Die EG-Konformitätserklärung steht auf unserer Homepage im Service/Downloadbereich zum Download bereit.
Mounting and Connection Instructions IK2 block lock Safety instructions Please read these instructions carefully and completely, before installing and starting to work with this unit. The unit has been built in accordance with state-of-the-art standards. Only use the unit: - according to the designated use and - in technically perfect and correctly installed condition - according to the technical data.
Mounting and Connection Instructions IK2 block lock Installation of the block lock Procedure 1. Cover the cylinder openings of the block lock with adhesive tape before starting the installation. This prevents the penetration of foreign objects. 2. Drill corresponding recesses for block lock and profile semi-cylinder (use drilling pattern). Make sure that there is enough space at the bottom side of the opening for the profile semi- cylinder for laying the flat-band cable of the rosette.
Seite 17
Mounting and Connection Instructions IK2 block lock Door leaf IDENT-KEY section block lock Drill holes for rosette fixture (use the drilling pattern) IDENT-KEY rosette Connecting cable Attention! Make sure that there is sufficient space at this point for the rosette connecting cable! 5.
Mounting and Connection Instructions IK2 block lock Installation instructions To allow the block lock bolt to be moved in and out during the installation the brown wire has to be connected to the +12 V and the white wire to ground. The green and the yellow wire remain unconnected.
Seite 19
Mounting and Connection Instructions IK2 block lock Conversion of the block lock Face plate fixing screw Bolt length extension The IK-block lock bolt can be extended with the corresponding kit from 25 mm to bolt lengths of 35 mm, 50 mm, 55 mm, 65 mm, 80 mm and 100 mm. Bolt length Item-No.
Seite 20
Mounting and Connection Instructions IK2 block lock Block lock mounting behind a multiple locking device (wooden doors) In combination with the special face plate 16 mm (Item-No. 022121 ) an IK-block lock can be mounted easily on a door with multiple locking. Also see the folder "Electrical installation of hazard detection systems"...
Mounting and Connection Instructions IK2 block lock Connection instructions / grounding Please note: Provided that the operating voltage drop does not exceed 0.5 V DC (see drawing) the IDENT-KEY block lock can be mounted at a maximum distance of 5 m to the evaluation unit.
(Depending on door stop) 90° right or 90° left The IK block lock 022220 complies with the essential requirements of the R&TTE 1999/5/EC Directive, if used for its intended use. The EC-Declaration of Conformity can be downloaded from our homepage (Service / Download).
Mounting and Connection Instructions IK2 block lock The program Item-No. 022220 IDENT-KEY block lock IK2 Item-No. 022167 IDENT-KEY rosette Color: black Item-No. 022169 IDENT-KEY rosette Color: greywhite (similar to RAL 9002) Item-No. 022180 Distance piece 2.5 mm (between door leaf and rosette) Color: black Item-No.