Dab/Fm Reception; Handling The Pal+Bt - Tivoli Audio Pal+Bt Benutzerhandbuch

DAB/FM Reception

When moving the PAL+BT to another location where there may be different DAB stations from the
previous location, it is recommended to run a "Full Scan" to initiate a new scan to refresh the DAB station
list.
FM: In strong signal locations, reducing the antenna's length may provide better reception.
RDS (FM band only)
The Radio Data System (RDS) transmits text data along with the audio broadcast. Not all FM stations
utilize this service, thus text may not be present on some stations. For stations broadcasting RDS, the text
still might not appear, or might appear scrambled if the signal is too weak. This is not a fault of the
PAL+BT. In such cases, experiment with the position of the FM antenna. Note RDS content is determined
by each individual FM station.

Handling the PAL+BT

The PAL+BT is weather resistant, but it is not weather proof. It should not be immersed in water or held
under running water. It also should not be exposed to extreme temperatures.
The PAL+BT is designed to be portable, but it is not indestructible. Do not drop it, throw it, or subject it to
strong impacts.
Always grip the PAL+BT using the side indentations to reduce the chance of it slipping out of your hand.
Cleaning
Never use any harsh cleansers or solvents on your radio. Normal everyday wear and tear or damage
resulting from cleaning or chemicals is not covered under the factory warranty. To clean the PAL+BT use a
soft cloth and do not rub hard.
15
English