Maintenance And Cleaning; Accessories; Technical Data; Warranty - IKA R 474 Betriebsanleitung

The stand pillar must always be lightly oiled, so
that raising and lowering is not made more dif-
fi cult due to increased friction.
Apart from this, the telescopic stand is mainte-
nance-free.
Spare parts order
When ordering spare parts, please give:
- Machine type
- Manufacturing number, see type plate
- Item and designation of the spare part, see
www.ika.com, spare parts diagram and spare
parts list
Repair
In case of repair the device has to be cleaned and
free from any materials which may constitute a
health hazard.
If you require servicing, return the appliance in
its original packaging. Storage packaging is not
suffi cient. Please also use suitable transport pa-
ckaging.
• SI 400 Safety limit switch
In accordance with IKA
the warranty period is 24 months. For claims un-
der the warranty please contact your local dea-
ler. You may also send the machine direct to our
works, enclosing the delivery invoice and giving
reasons for the claim. You will be liable for freight
costs.
Diameter stativ rod
Dimensions (WxDxH)
Lift (gas spring)
Subject to technical changes!

Maintenance and Cleaning

Accessories

Warranty

warranty conditions,
®

Technical data

mm
mm
mm
Only clean IKA ® appliances using these IKA
approved cleaning agents:
Dirt Cleaning agent
Dyes Isopropanol
Building materials Water containing
detergent,
Isopropanol
Cosmetics Water containing
detergent,
Isopropanol
Food Water containing
detergent,
Fuels Water containing
detergent,
Other materials Please consult IKA
- Wear protective gloves when cleaning the de-
vices.
- Please consult IKA ® before using any cleaning
or decontamination methods, other than tho-
se recommended here.
• SI 474 Support holder
The warranty does not cover wearing parts, nor
does it apply to faults resulting from improper
use or insuffi cient care and maintenance contra-
ry to the instructions in this operating manual.
48
460 x 1200 x 530
500 - 1000
®
®
10