Operation; Cleaning And Care - Ideen Welt 52014x36 Bedienungsanleitung

3. Press the ON button (e.g. for channel A) for the channel you wish to assign the
outdoor socket to.
4. Upon successful assignment, the LED remains lit.
5. Press the OFF button for the same channel. Upon successful assignment, the
LED goes out and the outdoor socket is off.
DELETING ASSIGNMENTS
1. Plug the outdoor socket into a grounded power outlet.
2. Press and hold the on/off button for 6 seconds or until the LED begins flashing.
3. Press and hold the on/off button briefly. The LED turns off and then back on. All
assignments are now deleted.

OPERATION

1. Plug the outdoor socket into a grounded power outlet.
2. Lift the cover and connect your electrical device (e.g. lamp) to the outdoor socket.
3. Turn your electrical device on.
4. Press the ON/OFF button for the channel the power outlet is assigned to turn
your electrical device on/off.
Please note: The on/off button LED remains lit when the outdoor socket is on and
goes out when you turn the product off.

CLEANING AND CARE

• Use a dry cloth to clean the product housing.
Attention! Do not use alcohol, acetone, benzene, aggressive
cleaning agents, etc., to clean the synthetic parts of the device. Do
not use hard brushes or metallic objects.
TECHNICAL DATA
Remote control
Battery operation:
Range:
Outdoor socket
You can connect an electrical device to the outdoor socket with a supply voltage of
230V ~, 50Hz and a nominal current of up to 16 ampere (total power max. 3680W).
Protection class:
t
1x 3V lithium battery type CR2032
Max. 25m
IP44
12