Yealink RCH240 Bedienungsanleitung Seite 8

Method 2: By CLI
Serial Connection:
1. Connect the RCH240's CLI port to the computer's serial port using the CLI cable.
2. Use Secure CRT software to configure. In Secure CRT, select
as the protocol, and set the baud rate to
3. Sign in to the RCH240 using default user name and password.
Ethernet Connection:
1. Connect the computer's Ethernet port to any port on the RCH240 using a network cable.
2. Assign an IP address within the 192.168.X.X/16 subnet (e.g., 192.168.0.88) to the computer's
network adapter, with the subnet mask set to 255.255.0.0.
3. In Secure CRT, select
the Hostname field to log in.
4. Sign in to the RCH240 using default user name and password.
After logging in, you can configure the command line on the software to manage the RCH240.
The dafult username and password is
9600 bps
Telnet as the protocol and enter the RCH240's IP address (192.168.0.1) in
admin
Quick Connect
.
.
6
and choose Serial