Sign In The Rch240 - Yealink Rch240 Bedienungsanleitung

Cable Requirement
We recommend using Cat5e or higher cable for Gigabit Ethernet ports.

Sign in the RCH240

Method 1: By the web user interface
1. Connect the computer's Ethernet port to any port on the RCH240 using a network cable.
2. Assign an IP address within the 192.168.X.X/16 subnet (e.g., 192.168.0.88) to the computer's
network adapter, with the subnet mask set to 255.255.0.0.
3. Open a web browser and enter the RCH240's default IP address (http://192.168.0.1) in the ad-
dress bar to access the web user interface.
4. Change the login password upon first login, then log in again using the new password.
The dafult username and password is admin .
5