Commodore CM1003 Gebrauchsanweisung Seite 5

EN
-Replace the battery when it is worn out.
-Use only batteries of the specified characteristics.
-Make sure that the battery is placed with the
correct polarity.
-Never place the battery compartment near fire
or heat source.
-Do not throw the batteries into fire or place the
control unit to the sun.
-Do not throw the batteries into the fire or place
the control unit under
the sun light. Do not mix used and new batteries.
"TARE" FUNCTION
-With this device you can measure the weight of different
ingredients consecutively, without mixing them.
-First, place an ingredient on the weight platform.
-Press ON/OFF/TARA button to reset the weight reader. A "0"
will display before adding the next ingredient.
-Repeat this operation as many times as ingredients you want
to add.
INSTRUCTIONS FOR USE
-Before using the appliance, place the battery in its location
making sure that the voltage is correct.
-Open the battery cover located on the back side of the scale,
and insert the battery according to the marked polarity.
-Then the scale will automatically turn on. To turn it off, press
the ON/ OFF for a few seconds and the scale will turn off.
-If you want to put a container on top of the base, to weigh
liquids, or add ingredients in a same measurement, press the
ON/OFF I switch, the scale will automatically It will reset to 0
thus you can add new ingredients.
-This scale can weigh in g/oz/lb:oz/ml. By default, it gives
5