daytime Smart Control SC20 Bedienungsanleitung Seite 22

8. Initial
To get started, you will be guided through the initial configuration in 8 steps:
Step 1/8:
Step 2/8:
Step 3/8:
Step 4/8:
Step 5/8:
Step 6/8:
Step 7/8:
Step 8/8:
All steps can be individually changed and configured at any time. You will find further explanations on
this on the following pages.
Select language – Tap on your preferred language
Rename and link control (master & slave) – Forgive for your
Control an individual name of your choice. If you have several controllers in use, they can
be searched for and linked via the
together as one unit.
Sunrise | Sunset - Move the sliders to set the sunrise and sunset times and duration.
Brightness – Here you can set the maximum brightness. In its entirety or for each light
colour individually.
With the SC20, the white, blue and red LEDs can be controlled separately
with the controllers within a daytime® LED system (except onex®). If, for
example, only modules with white LEDs are used in the matrix LED system,
then the controls for the blue and red LEDs have no function.
Acclimation – This feature allows new aquarium residents to gently get used to their new
home.
Moonlight – In the next step, you have the option to activate the moonlight. The moonlight
can be operated either with constant brightness or as a monthly cycle, in which the
brightness varies during the phases of the moon.
Clouds - Random cloud simulation can be set individually.
Network – If you don't want to change anything in the network settings, you can skip this
step. Otherwise, you have the option to change the Wi-Fi network name or password-
protect access to the SC20 here. You can also integrate the controller into your existing Wi-
Fi network. The advantage of this is that you no longer have to switch Wi-Fi networks to
access your Smart Control. To do this, click on the Search Networks button and select your
home network. Next, enter your router's password.
Important: Once the controller is integrated into an existing network, it can no longer be
accessed via the address
and in the future, enter
internet browser to access your SC20.
"+ Plus" symbol and then configured and operated
http://192.168.1.1 . Reconnect to your home Wi-Fi network
http://sc20.local or http://sc20/ in the address bar of your
22