5
OTHER FEATURES
5.1
CAMERA FIRMWARE UPDATE AND LOAD DEFAULT SETTINGS
To update the firmware version of the IP cameras connected to the NVR, copy the camera update file to the USB pen
drive. The update file is available in the CD provided with the NVR or it can be obtained by sending a request mail to
URMET customer service:
cloud@urmet.com
After saving the file to the USB pen drive, insert it into a free USB port of the NVR, open the NVR menu at the page
[Advanced → Maintain], click on [IPC upgrade]. Select the file, confirm and select the NVR channels of the IP cameras to
be updated.
WARNING:
Camera update time is usually not longer than 10 minutes.
During update do not disconnect nor switch off the NVR and the cameras.
During update the camera doesn't send images, so they aren't visible in the LIVE grid any more. The video flux
is automatically restored when the update procedure is completed.
After the firmware update, it is suggested to load the camera default settings from the menu page [Advanced →
Maintain] by pressing [IPC load default].
DS1093-154
29