Cleaning And Maintenance - Homcom 800-258V90 Bedienungsanleitung

time for 2 seconds), the LED display screen shows "Loc".
2) In the mode of lock, the LED display screen shows power/temperature and "Loc" alternately.
3) In the mode of lock and timer, the LED display screen shows power/temperature, remaining
timer and "Loc" alternately.
4) In the mode of lock, press "On/Off Button" to turn off the cooker, the "Lock LED" will
keep consistent on, the LED display screen shows "Loc". Keep pressing "Max Power /
Temperature Shortcut Button" and "Min Power / Temperature Shortcut Button" at the same
time for 2 seconds again to unlock the panel and then you could turn on the cooker.
5) In the mode of lock, keep pressing "Max Power / Temperature Shortcut Button" and "Min
Power / Temperature Shortcut Button" at the same time for 2 seconds again, "Lock LED"
goes out, the control panel is unlocked.
10. Fan Keeps Working
1) The fan will keep working for 2 minutes to 5 minutes for heat dissipation after finish cooking.
It will stop automatically until the glass surface temperature below 50°C.
11. High Temperature Indicator
1) After turn off, the LED display screen shows "-H-" (High Temperature Indicator), it will
disappear only after the glass surface temperature below 50°C.
12. Automatically Switch Off When No Operation for 2 Hours
1) In working mode, the cooker will automatically switch off if without any operation after 2
hours except the mode of timer.

CLEANING AND MAINTENANCE

1. Turn off the appliance by pressing "On/Off" and wait until the light turns off. Once off, unplug
the power cord properly.
2. Wait for some time and let the appliance cool down.
3. You can use mild detergent or dishwashing liquid with a soft cloth to remove dirt.
4. Do not clean it with running water or immerse it in water as water will get inside and damage
the appliance.
5. Always make sure that the top plate and the pan/pot is clean before cooking as the dirt from the
pan/pot will stick to the plate and plate will get discolored.
6. You may clean the air vent by vacuum cleaner to suck up the dirt or you can use cotton if the
dirt is with oil.
7. Toothbrush with little soap can also be used to clean the surface as long as you use it gently on
the appliance.
8. Do not use abrasives or strong detergents as it may get chemical reaction.
9. After dirt has been removed, use a dry, soft cloth to wipe dry the appliance.