Beldray REVO Benutzerinstruktion Seite 9

Using the Revo Cordless
The crevice tool is ideal for cleaning radiators, corners, recesses and other hard-to-reach
areas. The upholstery and brush tools are useful for removing dust and dirt from folds in
fabrics, curtains and upholstery, as well as from shelves, cupboards and windowsills.
STEP I: Check that the vacuum cleaner is switched off and remove it from the charging base.
STEP 2: If required, fit the selected attachment by firmly inserting it into the air inlet. The brush
tool does not insert into the air inlet directly; it must first be attached to the crevice tool.
STEP 3: Turn on the vacuum cleaner by pressing the power button. Press the boost button
to usethe maximum power setting; the indicator light will illuminate blue. To use the
minimum power setting, press the boost button again; the indicator will illuminate red.
Note: The indicator light will flash when the battery is running
low and needs to be charged.
Warning: Do not use the vacuum cleaner without the HEPA
filter, filter cone and dust container in position.
Clean the HEPA filter regularly to preserve suction.
Emptying the Dust Container
To maintain optimum performance, the dust container must be emptied regularly. If
there is a reduction
STEP 1: Hold the vacuum cleaner with the dust container facing upwards. Pressthe dust
container front release button and carefully remove the dust container cover from the
dust container.
STEP 2: Empty the dust container slowly and carefully to reduce the amount of dust
released back into the atmosphere. If necessary, clean the individual parts with a soft,
damp cloth and dry thoroughly.
STEP 3: Refit the dust container cover by aligning it with the vacuum cleaner main unit
and pushing into place until it clicks.
Note: It is recommended
emptied outdoors.
in suction power, empty the dust container.
that the dust container is