Xiaomi Mi AloT Router AC2350 Bedienungsanleitung Seite 8

English
FAQ
What should I do if the Mi Home app fails to automatically
Step 1: Check that you have configured the network settings on your router and that the router is connected to
the Internet. The Internet
Step 2: Check that the router has been added to the Mi Home app. and that the Mi Home app is logged in to
the same Mi account as the Mi Wi-Fi app.
Step 3: Make sure the "A IoT Intelligent
option can be configured
Step 4: Check that your Mi Smart Home device is a Wi-Fi-enabled
version. The device must be placed within range of the Mi Wi-Fi router. Some devices with built-in Internet
connectivity are not supported.
I have finished setting up my network.
Step I: Use your phone to search for the Wi-Fi network set by your router. If you can't find it, make sure that
the router is connected
Step 2: Connect your phone to your router's Wi-Fi network, go to router.miwifi.com",
problem based on the network diagnostics
I've forgotten the administrator
If you haven't set a specific password, your administrator
so try using this to log in. If the problem persists, it is recommended
settings, then set up the network again
How do I restore my router to the factory
First make sure that the router has finished bootin
router for more than 5 seconds and let go
booting up again, the reset was successful
What do the different
Network status light
System status light
Network status light Internet
Off
Orange
Blue
System status light System
Off
Orange
Blue
Network port indicator
Off
Green
6
indicator should be constant
Antenna
in the Mi Wi-Fi app.
Why cant I connect to the Internet?
to the power and has finished booting up
results
password for my router. What should I do?
settings?
McåFtp.sRu
indicator lights mean on the router?
two colors (blue and orange)
The network cable is not plugged into the WAN port
Constant: The network cable is plugged into the WAN port
but the upstream network
Constant:
and the upstream
two colors (blue and orange)
Not connected to power supply
flashing: System update in progress
Constant (turns blue after approx. 1 minute): The system is starting
Constant (does not turn blue after approx. 2 minutes): System fault
Constant: Working normally
one color (green)
The network port has no physical connection
The network port has a physical connection
detect my Mi Smart Home device?
blue.
Automatic Scan" option has been enabled on the router. This
device and that it is running the latest
password will be the same as your Wi-Fi password,
that you restore your router to the factory
up, then hold down the Reset button at the base of the
ight turns orange. When the router finishes
is not available
The network cable is plugged into the WAN port
network is available
and try to fix the