axing BVS 13-68 Betriebsanleitung Seite 4

Field of application:
The devices are suited only for amplifying radio and television signals in the
house! If the device is used for other purposes, no warranty is given!
The illustrations show application examples for the distribution in star (1) and
tree structure (2).
1
BSD 963-17N
BSD 963-12N
BSD 963-11N
BVS 15-68
BVE 30-01
Radio
TV
2
Coax
Up- and Downstream (Coax)
Erdung | Grounding
Grounding and Mounting:
To avoid dangerous power surges (e.g. risk of fire
and electrocution), all devices have to be grounded
according to EN 60728-11. Use the screw terminal
at the device (3).
Use the mounting screws included in the delivery
and the mounting holes of the devices (4).
RF Installation:
4
Connect the input of the amplifier
to the interconnection point.
Connect the output of the amplifier
to the antenna sockets or the taps
used.
4
Use a highly shielded coaxial cable
with an F connector. Suitable cables
and connectors can be found in the
current AXING catalogue or under
www.axing.com.
4
The test ports at the input is bi-
directional. This test point has to be
activated or deactivated with the
adjacent jumper.
3
4
Test
Input Output
Power indicator LED:
The amplifier comes with LED (POWER) which shows the operation
mode:
green = in operation
!
off = no power supply
!
DS 2
DS J2
DS 1
DS
J1
US J1
US
J2
Adjustments of gain and slope:
Gain and slope are adjusted (continuously variable) with the control
buttons (DS 1 and DS 2) in the forward frequency range.
With control button (US) one adjusts the gain (also continuously
variable) of the return path before the amplifier stage.
The jumpers (DS J1 and DS J2) are used to adjust the interstage
attenuation and slope in the forward frequency range.
The jumpers (US J1 and US J2) are used to adjust the interstage slope
and attenuation of the return path.
4
US