IKOHS CREATE WINDCALM Bedienungsanleitung Seite 5

SAFETY INSTRUCTIONS
When using any electrical appliance,basic safety precautions should always te observed.
• Readthis entire manual carefully before beginning installation. Savethese instructiors.
• To reducetherisk ot personal i njury,allach the randirectlyto the supportstructurecf Ihe buildingaccordingto
these instructions, and use cnly the hardwaresupplied.
• Toavoidpossibleelectricalshock,beforeinstallingyourfan,disconnectthepowerby turningoff thecircuitbreak-
ers to the outlet box and associated wall switch location. If you cannot lock the circuil breakers in the off position,
securely fasten a prominent warnirg device,such as a tag, to the service panel.
• All wiring must be in accordancewith national and local electrical codes and ANSI/NFPA70. If you areunfamiliar
with wiring, use a qualified electrwan.
• Donot bend the blade attachment system when installing, balancing, or cleaning the fan.
• Neverinsert foreign objects between rotating fan blades.
• TOreduce the risk cf fire. electrical shock, or motor damaqe.do not use a solid-stete speed control with this fan.
Use only original speed controls.
• This appliance can be used by ch•'dren aged from 8 years Oldand above and personswith reducedphysical, sen-
scry or mental capabilities or •ackof experience and knowledge it they havebeen given supervisioncr instruction
concerning use of the appliance in a safe way and urderstand the hazards involved. Children shall not play with
the appliance, Cleaning and user maintenance shell not be made by children unless they are older then 8 and
supervised. Close supervision is necessary when any appliance is used by or near children.
NOTE: T heimportantsafetyprecautions andinstructionsappraringin themanual a re notmeantto coverall possi-
ble conditions and situations that may occur. It must be understood that common senseard caution arenecessary
factors in the installation and operation of this fan.
INSTALLATION INSTRUCTIONS
Installing the hanger bracket
1--1
11
Please. drill an 8 mm in diarnetre hole on the concrete ceiling, and insert the bolt. Then.align the bracket with the
hole and tighter With a
Wood ceiling
EN
Concreteceiling