KAMA Connect Installationsanleitung

O O
IDE"
3.54>3HDD
•X*uhliS-ATA. S-ATA 11
S-ATA•ti
2.54>+HDD.
S-ATA%
2.54>3HDD. 3.54>5-HDD
AC75Y5iiB
MINI-USB*-.F
IDEQi
3.54>5HDD
? 4k 16:27
*107
USB F343(G)
51) y5CT
USB5—5
ZC)-E.
'USB
OK&5Uv5UCT
• Connecting to IDE Device
To Power Outlet
usg ro
MINI-USB
o
IDE Device
3.5" HDD
5.25" Optical Drive
: Connecting to S-ATA Device
*This product supports the reading/writing for S-ATA & S-ATA II devices,
S-ATA Device
2.5" HDD, 3.5" HDD
5.25" Optical Drive
MINI-USB port
Connecting IDE Device & S-ATA Device
*This product supports the connection of IDE & S-ATA devices simultaneously, but does not guarantee the function of all features.
S-ATA Device To
2.5" HDD, 3.5" HDD
5.25•• Optical Drive
From AC Adaptor
• (The cable from right
• side of this drawing)
MINI-USB Port
o o
IDE Device
3.5" HDD
5.25•• Optical Drive
How to Disconnect
Please follow the following steps or turn Offthe power Ofyour PC before disconnecting this product. Improper disconnection may cause damage
to the product or possible data loss.
P hEk 16.27
(j)Right click the above icon shown on the task bar of
your monitor.
Stop USB Mass Storage Device - Drive(G:)
@The above pop-up window will appear, and then
click.
GUIDE
OMake sure the power cord is not plugged into the power outlet
or turn off the power of the AC adaptor,
power cord into the IDE device.
@Connect the "Kama Connect" into the IDE port of the IDE
device.
(3)Connectthe USB cable comes in the package to the "Mini-
Port
USB' port of the 'Kama Connect".
@Plug in the AC adaptor into the power outlet, and turn on the
power of the AC adaptor.
To USB Port
(5Make sure to confirm the OS Of your PC is properly working,
of pc
then connect the USB cable into your PCs USB port (Please
make sure to follow the steps above as the "Kama Connect"
may not be detected properly if the product is connected
when the power of the AC adaptor is off, or starting the OS or
the PC with the 'Kama Connect" plugged into the PC).
but not supporting the optional functions such as NCQ Or 3Gbps.
sure the power cord is not plugged into the power outlet
or turn off the power of the AC adaptor,
power cord into the "Kama Connect"
(2)Connect the 'Kama Connect" into the S-ATA port of the S-ATA
device.
(3)Connect the USB cable comes in the package to the "Mini-
USB' port Of the "Kama Connect"
@Plugin the AC adaptor into the poweroutlet, and turn on the
power Of the AC adaptor.
To Power Outlet
$)Make sure to confirmthe OS of your PC is properlyworking,
then connect the USB cable into your PC's USB port (Please
TO USB port
make sure to follow the steps above as the "Kama Connect"
Of pc
may not be detected properly
when the power of the AC adaptor is off, or starting the OS or
the PC with the "Kama Connect" plugged into the PC).
Simultaneously
OMake sure the powercord is not plugged intothe
power outlet or turn Off the power Of the AC
IDE Device*
adaptor, then connect
cable to power cord and the other part to the IDE
device.
ToPowerOutlet eConnect the "Kama Connect" into the IDE device
& the S-ATAdevice of each respected port.
(3)Connect the USB cable comes in the package to
the "Mini-USB" port of the "Kama Connect".
@Plug in the AC adaptor into the power outlet, and
To USB Port
turn on the power of the AC adaptor.
15Make sure to confirm the OS of your PC is
properly working, then connect the USB cable
into your PC's USB port (Please
follow the steps above as the "Kama
may not be detected
connected when the power Of the AC adaptor is
off, or starting the OS or the PC with the "Kama
Connect" plugged into the PC).
Safe To Removed Hardware
The •USB Mass Storage Device' device can now be safely removed trom the system.
(3)The above pop-up window will appear, then click "0K".
@Disconnect this product from the USB port Of your PC
while the power of AC adaptor is off.
English
then connect the
then connect the
if the product is connected
the divided part of 4-pin
make sure to
Connect"
properly if the product is