XD COLLECTION FindMate Dual Bedienungsanleitung Seite 7

USING THE LOCATOR
Power On
Press and hold the power button for 5 seconds. A melody will play and the LED
will flash briefly to confirm the device has powered on.
Power off
While the device is on, quickly press the button 5 times within 2 seconds. The
device will emit a beep, flash the LED three times, and then power off.
Re-enter Pairing Mode
When to Use
This is necessary after un-pairing the device from the app.
How to Enter
• R estart the device by pressing and holding the power button for 5 seconds,
or perform a factory reset (see instructions below).
Factory Reset
1. While the device is on, double-click the button. The device will beep.
2. Press the button for 4 times. You will hear a sound. After the sound
immediately press and hold the button until you hear multiple beeps end.
3. The device has now been reset and can be re-paired.
7