Seite 1
(b) Wireless Power; 15 W Max. (2014/53/EU art. 10-9 Simplified Declaration of Conformity) Hereby, MOB, declares that item MO2651 complies with the essential requirements and other relevant conditions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.momanual.com.
Seite 2
MO2651 Wireless car charger 1. Wireless charging position 2. Type-C plug Specifications: Input: DC 5V/2A, 9V/2A Output: 15W Max Wireless distance: 0.7-1mm Instructions: 1. Connect the charger with a suitable power supply by using the cable provided. 2. Place your device on the top of the charger properly to avoid connection failure.
Seite 3
Kabelloses Kfz-Ladegerät 1. Kabellose Ladeposition 2. Typ-C-Stecker Technische Daten: Eingang: DC 5V/2A, 9V/2A Leistung: 15W Max Kabellose Entfernung: 0,7-1mm Anleitung: 1. Verbinden Sie das Ladegerät über das mitgelieferte Kabel mit einer geeigneten Stromquelle. 2. Platzieren Sie Ihr Gerät korrekt auf dem Ladegerät, um Verbindungsfehler zu vermeiden.
Seite 4
Distance sans fil : 0,7-1 mm Instructions : 1. Connectez le chargeur à une alimentation électrique appropriée à l'aide du câble fourni. 2. Placez correctement votre appareil sur le dessus du chargeur pour éviter tout échec de connexion. Il est recommandé de retirer l'étui de protection de l'appareil pour une utilisation optimale.
Seite 5
3. Las velocidades de carga pueden variar según el dispositivo y la entrada de energía. Precaución: Si se sitúan objetos metálicos encima de los dispositivos de carga, pueden provocar un mal funcionamiento del producto y dañar el dispositivo de carga. No utilice este producto sobre una placa o superficie de trabajo metálica.
Seite 6
Draadloze auto oplader. 1.Draadloze oplaadpositie 2.Type-C stekker Specificaties: Invoer: DC 5V/2A, 9V/2A Uitvoer: maximaal 15W Draadloze afstand: 0,7–1 mm Instructies: 1. Sluit de oplader aan op een geschikte stroomvoorziening met de meegeleverde kabel. 2. Plaats je apparaat correct op de bovenkant van de oplader om verbindingsproblemen te voorkomen.
Seite 7
Instrukcja: 1. Podłącz ładowarkę do odpowiedniego źródła zasilania za pomocą dostarczonego kabla. 2. Umieść prawidłowo urządzenie na ładowarce, aby uniknąć awarii połączenia. Zaleca się zdjęcie etui ochronnego z urządzenia w celu jego optymalnego wykorzystania. Wymagane jest wejście minimum 9V dla wyjścia bezprzewodowego 15W. Jeśli napięcie wejściowe jest niższe niż...