CANGAROO CALLISTO Gebrauchsanweisung Seite 17

• Pairing with a camera: Use the cursors for movement to reach and select the second icon to pair the camera with the
monitor. Press the OK button to confirm.
• Delete Camera: Use the cursors for movement to reach and select the third icon to delete camera. Press OK to confirm.
4.Automatic night vision: The baby unit has 8 high-intensity infrared LEDs for clear images in the dark. When the built-in
photo sensor on the top of the device detects a low level of ambient light, the LEDs will be activated automatically. The
real-time image on the parent unit screen will be displayed in black and white, showing the objects that are 5 m away
from the camera. To disable night vision mode and display color video, the camera must be in a well-lighted environment.
5.Two-Way Talk Function: Generally, the camera transmits sounds and images to the parent unit. If you wish to use two-
way talk function, press and hold the Two-Way TALK button (PU.1-F MENU/TALK). Your voice will sound from the speaker
of the camera, which you placed in the baby room.
PRINCIPLE OF WORK: To activate the functions, always press the MENU button (PU-1 F MENU/TALK) - the display shows
the main MENU, from which you select the icon of the selected function and press "OK". Using the cursors for movement
up/down (▲&▼), left/right (&), you can move through the menu and submenu of each function.
1. ADJUSTING SOUND VOLUME: After entering the main MENU, select the "Volume" icon (see key A). Press the left and
right buttons(&), to choose your preferred sound level. or mute/unmute. Press OK to confirm.
2. ADJUSTING THE DBRIGHTNESS: After entering the main MENU, select "Brightness" icon (see key A). Press the left and
right buttons(&), to select your preferred brightness level. Press OK to confirm.
3. LULLABIES: After entering the main MENU, select the Lullabies icon (see key A). Use the up/down cursors (▲&▼) to
turn the "Lullabies" function on/off. Press OK to confirm.
4. ENERGY SAVING MODE: When the product is in Energy Saving mode, the video display automatically turns off after 30,
60 or 90 seconds, depending on the VOX voice activation settings.
5. VOX MODE: After entering the main MENU, select "VOX" icon (see key A). Press the up and down buttons (▲&▼), to
select the level, you need (from Off to High).
Note: When the power saving mode is on:
•If VOX is on: When sound is detected or when you press any button on the receiver, the screen will be turned on.
•If VOX is turned off: The screen will turn on, only if you press any of the buttons on the unit. Press OK to confirm.
6. ALARM SETTINGS: After entering the main MENU, select "Alarm settings" icon (see key A), where you have the option
to set the following functions:
• TEMPERATURE ALARM SETTING: Use the up or down cursors (▲&▼) to turn on/off the alarm function when the
highest and lowest temperature values are reached.
• BABY FEEDING REMINDER ALARM: Use the cursors for movementto to select the time you need to turn on the alarms.
Press OK to confirm. The alarm is switched on or off in the same way.
• ALARM VOLUME SETTING: Using the left/right cursors (&) select your preferred alarm volume. Press OK to confirm.
• RESTORE ORIGINAL SETTINGS: Pressing the last icon will restore the original settings of the Alarm function.
No reception on the monitor
MAIN MENU ON THE RECEIVER
TROUBLESHOOTING
When there is no connection between the monitor and the camera, the
message "Out of Range" appears on the monitor display. This indicates
that the monitor is out of range of the camera or that the connection
between the two devices has been lost. In such cases, the following things
should be checked:
•The power adapters may not be properly connected.
•Confirm that the camera and monitor are ON. Make sure the camera is
turned on and the green LED power indicator is lit.
•Camera may be located far away from the monitor.
•The camera may have lost connection with the monitor and needs to be
paired again. Camera and monitor may not properly paired, follow PAIRING
instruction.
•Make sure that the monitor and camera are not obstructed by walls,
floors, ceilings, or other electronic devices that may interfere with the
signal. It is recommended to keep the video monitor at least 1 meter away
from such devices. If the signal is weak, try moving the monitor and/or
camera to different positions in the rooms.
16