PCWork PCW10C Benutzerhandbuch Seite 2

Operation Of The Device
Installing the filter:
1. Open the filter holder; 2. Insert the activated carbon filter; 3. Close the filter holder
Adjusting the angle of the smoke absorber:
1. Loosen the knob on the side of the smoke absorber; 2. Adjust the angle of the device; 3. Tighten the side knob
Replacing the filter:
Follow the steps outlined for the installation process above. Please note that under normal working conditions and regular use, the
filter should be replaced once a month. This is due to the absorption capacity of the filter declining over time and use. In addition, a
replacement might also be necessary, if the filter is full of dust.
WARNING: Never allow the filter to get wet.
Information Regarding Waste Disposal
You are not permitted to dispose of this device in household garbage. This device corresponds to the EU-directive concerning the
"Waste of Electrical and Electronic Equipment". Please dispose of the device in your local collection point.
Importer:
Company Name
Address
Email
Internet
WEEE-No.
Local district court
P+C Schwick GmbH
Bergisch Born 87A, 42897
Remscheid, Germany
info@schwick.de
www.schwick.de
DE 73586423
Remscheid, Germany
Creation date of manual: May 2025 – all
technical changes reserved. No responsibility
is taken for any technical or printing errors.