Wired Connection - 8Bitdo Retro 18 Bedienungsanleitung

2.4G Connection
2.4
1. Turn the Mode switch to 2.4.
O
Follow the steps belowto re-pairthe
1.Turn the Mode switch
2. Connect the 2.4Gadapter to the USBport of your device.
3. Hold the Pair button for 3 seconds to enter the pairing mode, the Connection indicator starts to blink rapidly.
4. Wait for the numpad to automatically pair with the adapter. The Connection indicator will remain solid for 8 seconds and then go off to
indicate a successful
Wired Connection
OFF
1. Turn the Mode switch to OFF.
2. Connect the 2.4G adapter to the USB port of your device.
3. The Connection indicator will remain solid for 8 seconds and then go off to indicate a successful
connection.
numpad with the adapter:
to 2.4
connection.
2. Connect the numpad to the USBport of your device using the USB cable and wait until the
numpad is successfully recognized by your device before using it.
03