Hantech 10601079 Bedienungsanleitung Seite 25

OPERATING
Self-Clean function
1. This function help carry away the accumulated
dirt, bacteria, etc from the evaporator.
2. Press "CLEAN" button to enter this function
mode and it will show "AC" on the display of indoor unit.
3. This function will run about 30 minutes, and it will back
to the mode set before this function .Youcan press "ON/OFF"
or "Mode" to cancel this function
You will hear 2 beeps when it's finished or cancelled.
4. It's normal if there are some noise during this function
process, as plastic materials expand with heat and
contract with cold.
5.We suggest operate this function
condition to avoid certain safety protection
Indoor unit
Outdoor unit
6. We suggest operate this function
INSTRUCTIONS
during the process.
as the following
Temp<300C
per 3 months.
in any
ambient
features.
CLEAN