Directions For Use; Safety Measures - 1Control Solo Auto Kurzanleitung

Complete guide and safety / compliance information

1 - DIRECTIONS FOR USE

Description
1Control SOLO AUTO is an electronic device that allows the operation of a radio-controlled automation, such
as a gate or a garage, using a smartphone.
Control of an automation
SOLO AUTO is able to copy the automation remote control and therefore to control it behaving like the original
remote control.
It is able to copy all fixed-coded remote controls and most rolling-code remote controls, in the 433.0 MHz
to 868.0 MHz frequency bands, using the AM and FM modulations. The old low-frequency remote controls,
called quartz, are not compatible. The complete list of compatible remote controls is available on the 1Control
website or in the Complete Guide.
To control an automation, it is sufficient to copy a single remote control, it is not necessary to copy the remote
controls of all users.
SOLO AUTO communicates with smartphone using the Bluetooth LE 4 protocol. Therefore it is not necessary
to have an Internet connection to open gate and garage.
Operating distance
The max distance between SOLO AUTO and an automation to be controlled varies according to the type of
radio-control used. Normally such distance is between 20 and 40 meters.
The max distance between SOLO AUTO and a smartphone varies according to the model of smartphone used
and is normally about 15-20 meters.
Reinforced concrete walls or metal boxes can weaken or block the SOLO AUTO signal.
Operating conditions
SOLO AUTO must be placed inside the car, protected from the elements.
Security
When using SOLO AUTO for the first time, an 8-digit numeric PIN code must be set. This PIN must be kept
secret. PIN code holders are considered administrators of the device. It is possible to reset the PIN by perfor-
ming a factory reset of SOLO AUTO.
The SOLO AUTO administrator can invite other users to use an automation, without giving them the PIN code,
using the sharing features offered by the app.
The communication between SOLO AUTO and a smartphone is protected by latest-generation security algo-
rithms based on public keys and end-to-end symmetric encryption with ephemeral keys.
The communication between SOLO AUTO and an automation uses the same security algorithms as the copied
remote control. Therefore the degree of security offered in this communication is the same as that of the
remote control.
Power supply
SOLO AUTO comes with 2 LR1 1.5V alkaline batteries already inserted and is already turned on.
The batteries can be replaced when they are flat. SOLO AUTO keeps the copied remote controls and shared
accesses in memory even when it is not energized.
You can check the charge status of the batteries using the app.
Battery life varies according to the number of drives (openings or closures) made:
Daily openings Average duration
4 48 months
10 24 months
20 12 months
24
Date and time
SOLO AUTO is equipped with an internal clock that is used to check the users' access time rights. The internal
clock manages the European daylight saving time independently. The date will be set automatically by the
app at the first start.
Data and limitations
SOLO AUTO can control up to 6 radio-controlled automation and can be used by 2 people / smartphones.
Additional users can be purchased from the app.
App
The "1Control" App is free and can be downloaded from the Stores for iPhone and Android.
It is compatible with the following systems:
- Smartphone iPhone 4S or later with iOS 9 or later
- Smartphone Android with 4.3 system or later and Bluetooth LE 4
"1Control" app is able to manage many 1Control devices at the same time.
First installation
1. Download the "1Control" app from your smartphone's store
2. Connect with the app to the SOLO and set a secret PIN code
3. Copy the remote control following the guided procedure by the app
4. Place SOLO AUTO on the car dashboard or in the glove compartment
5. Use your smartphone, smartwatch, or Apple CarPlay/Android Auto to open the gate and garage
Copy of a remote control
The copy of a remote control takes place by following the wizard available on the app.
SOLO AUTO is able to automatically recognize the type of remote control you are copying and to provide the
appropriate copy procedure through the app.
NB: When copying a remote control it is advisable to be near the relative gate or garage.
The complete list of compatible remote controls is available on the 1Control website or in the Complete Guide.
Factory reset
You can completely delete all data stored on SOLO AUTO by restoring it to factory conditions. To reset, press
and hold the internal key for more than 10 seconds. Resetting the device can take up to 2 minutes.
The restoration of the device causes the loss of all the memorized remote controls and invalidates all the
shares created.
After sales service
In case of problems, write to technical support via the App or on the Website www.1control.eu
Pack contents
1 SOLO AUTO device
2 batteries (already fitted)
1 postcard with QR code to access the guides
Radio Frequencies
Freq. 433.05 - 434.79 MHz, Max. Power 10 mW (10 dBm)
Freq. 868.0 - 868.6 MHz, Max. Power 25 mW (14 dBm)
Freq. 2400 - 2483.5 MHz, Max. Power 100 mW (20 dBm)
Other details
Dimensions: 80x120x25mm
Weight (batteries included): 110g

2 - SAFETY MEASURES

Traffic safety first!
Please respect all local laws, drive with both hands and pay attention to road safety first of all.
25