Usb / Sd; Bt Functions; Aux - Auna Soundblaster Bedienungsanleitung

EN
26

USB / SD

• Select the USB or SD mode with FUNC. Insert a USB stick (or similar
USB storage medium / MP3 player) or SD card.
• You can scroll in the usual way with
/ to navigate through your music library contained on the
storage medium.
• As with an MP3 CD, holding down the arrow keys means switching
between folders.
• The Repeat and Random functions (see above) are also available here.
Please note: Connecting a USB stick (or comparable storage media) using
a USB extension cable can cause signal interference and is therefore not
recommended.

BT FUNCTIONS

• Select the BT mode with FUNC. The display shows bT and the pairing
LED (7) flashes.
• Activate BT on your smartphone/tablet/laptop (or other BT device) and
pair with „SOUNDBLASTER".
• If you are prompted to enter a password, type „0000" (four times zero).
• The successful connection is indicated by the blue lit LED (7). You
can now play back the sound of the media library contained on your
smartdevice via the SOUNDBLASTER M.
• You can scroll in the usual way with
/ to navigate through your music library contained on the
smartdevice/tablet.
Please note: The BT range is a maximum of 10 meters.

AUX

• Connect an external music or media player (CD/MP3 player,
smartphone, laptop, computer or similar) to the Aux input (8) of the
SOUNDBLASTER M using a 3.5 mm audio cable.
• Use the external player as usual. Make sure that the volume is set high
enough on the external player.
, and the arrow keys
, and the arrow keys