General Functions - Auna Soundblaster Bedienungsanleitung

Most functions can be controlled both on the device and via the
corresponding buttons on the remote control. Notes on using the remote
control:
• Point the remote control at the infrared sensor of the device at an angle
of 30° or less.
• The range is about 6-7 meters.
• Change the battery (CR2025, 3V) when it is empty and the remote
control loses its function. Proceed according to this sketch:

GENERAL FUNCTIONS

FUNC
After switching on, you can use the FUNC button to select the various
function modes of the SOUNDBLASTER M: TUNER (Radio) - CD - USB - AUX
- SD CARD - BT.
Energy saving function
If the unit is not used for 15 minutes in CD, MP3, USB, AUX, SD or BT
mode, it will automatically switch to standby mode to minimize power
consumption.
EQ
Press EQ repeatedly to recall one of 5 equalizer presets (FLAT, CLASSIC,
ROCK, POP, JAZZ).
Disco light
The SOUNDBLASTER M holds 8 light effect modes. Press and hold EQ/
LIGHT to select between the modes LIGHT 01 to LIGHT07 (colored lighting)
LIGHT 08 (chaser: all colors alternating). Press and hold EQ/LIGHT again to
turn the lights off.
EN
23