Audio Setup; Digital Output; Night Mode - Salora DVD314M Gebrauchsanleitung

Selecting the Video Output setting to switch between different video outputs
S-VIDEO: Set the video output to interlacing output.
COMPONENT: Set the video output to YUV output.
P-SCAN: If your TV is progressive TV, please select the option. You can get better
picture quality.
RGB: Set the video output to SCART output. If you select SCART connection, you
should set up the play mode as RGB state, then it will output normally.

8.3 Audio setup

Select Audio in the setup menu, and display the Audio submenu.

8.3.1 Digital output

Selecting the Digital Output setting allows the user to adjust the audio output on
S/PDIF ports to work in harmony with the audio
connected to the player.
Digital audio output is disabled.
Off
PCM Select this option when you are going to use stereo signals (2 channels).
You should combine this option with the option "Lower sampling rate," which we
explain further on
If you select this option the player will use the DVD's original audio track. Use
All
this option when you want to use the Dolby Digital AC3 signals through the
optical or coaxial audio output.

8.3.2 Night Mode

To adjust the linear compression ratio , select to ON when playing a disc in the day so
as to get better acoustical effect; while at night, you can select to OFF.
8.3.3 Down Sampling
quipment (e.g. receiver, speakers)
e
GB-20