Lamax Electronics Visor RV10 Benutzerhandbuch Seite 2

PROTECTIVE GLASSES
Intended use
LAMAX Visor RV10 protective glasses are designed for motorcyclists, cyc-
lists, sports riders, etc. They protect against wind, sunlight, water, snow,
dust or hard objects. Although no glasses can prevent injury, their use and
responsible wearing within the limits of competence and common sense can
significantly reduce the risk of an accident.
Putting on
Put the glasses over your eyes and pull the headband over the crown of your
head to the back of your head. It is important that the protective grille on
the glasses between your eyes fits comfortably on the bridge of your nose,
which will protect it. Adjust the length of the headband as needed.
Changing the lens
Removing the lens
1. Hold the glasses with both hands.
2. Start at the top of the glasses and gently pull the frame away from the
lens to release the notches in the lens from the posts.
3. Place the removed lens on a flat surface. Be careful not to scratch your-
self.
Installing the lens
1. Adjust the shape of the lens according to the illustration.
2. Insert the lens into the holes and insert the notches of the lens into the
corresponding posts of the frame.
3. Make sure that the lens is properly inserted into the frame and that all
notches are correctly positioned in the posts.
4. After inserting the lens into the frame, remove the lens protective cover.
Eyeglass Care
› Proper care will ensure safe operation and extend the life of these gla-
sses.
› Clean the glasses with a neutral soapy cleanser and water.
› Wipe off moisture with a soft, clean cloth or let it air dry.
› Do not wipe moisture from the glasses with abrasive cloths, as this may
scratch the glass or damage the filter properties.
› If the glasses are scratched, contact your dealer for replacement lenses.
Use only genuine replacement lenses.
› Do not expose the glasses to aggressive cleaning agents or chemicals.
EN – USER MANUAL
- 1 -