SubSonic MOBILE PRO GAMING CONTROLLER Bedienungsanleitung Seite 4

4. Connecting the controller
1. Turn on the console.
2. Go to the "Controllers"
3. Then in the tab "Change style/order".
4. Simultaneously press the HOME and Y buttons on your controller
to turn it on. The LEDs will then flash from top to bottom, the
controller is in pairing mode.
5. When the indicator light is fixed and your controller appears on
your screen, this means that synchronization
For information on how to use your controller, please refer to the user manual for your Nintendo
SWITCH system.
NOTE: Once the installation is completed for the first time, the wireless controller is identified
console. All you have to do now is press the Home button on the controller to connect it.
5. Connecting the controller
1. If your PC is not equipped with Bluetooth, you can use the controller in wired mode.
2. Turn on your PC.
3. Plug the supplied cable into one of the USB ports on your PC. Plug the USB-C plug
into the controller.
4. The "Xbox 360 Controller for Windows" driver is installed automatically.
5. At the end of the installation,
on, the controller is ready for use.
NOTE: On a PC, the controller operates under the X-Input protocol.
6. Vibration
The controller is vibrating when used on Nintendo SVVITCH and PC. The vibration does not work
under Android and iOS.
The intensity of the vibration is adjustable, according to 5 levels. To adjust it:
7. Turbo function
The controller is equipped with a Turbo mode. You can assign the Turbo function to the following
buttons: A, B, X, Y, LB, LT, RB, RT. To do this, hold the button (for example A) and press the Turbo
button. The LED around the right stick turns red, the function
to Nintendo SWITCH
menu.
to a PC (wired mode)
LEDs no 1 and n04 of the controller
is now complete.
remain
is now affected.
by the
2