Karlsson KA5654 Bedienungsanleitung

INSTRUCTION MANUAL ALARM CLOCK
KA5654
Before using the product, please remove the plastic stopper
from the battery.
1. Features:
Display Modes:
• DP-1: Time, date, and temperature displayed alternately.
• DP-2: Time display only.
• Calendar: From 1st January 2000 to 31st December 2099.
• 12/24-Hour Format Selection: Default mode: 24-hour; 1st
January 2016; 12:00.
• Alarms: Set up to three alarms, each lasting 1 minute, with a
sound: "bi bi bi..."
• Dimmer Display: Automatic dimming from 18:00 to 06:59.
• Brightness Levels: Four levels available available (L1 - L2 -
L3 - L4; L4 is the brightest, L1 is the dimmest).
• Temperature Display: Celsius (Cº) or Fahrenheit (ºF).
• Sound Control Mode (Power-Saving Mode): Activates
display on sound or touch.
Power Supply:
• 4 x AA batteries (not included)(for backup only)
• 1 x CR2032 battery (included).
• 1 x USB cable (1 metre included).
Notes:
1. When using batteries only, it is recommended to enable
sound control mode ("on:Sd").
2. The built-in CR2032 battery maintains the internal time
program, but the display will not be visible externally.
2. Packing List:
Please ensure all items are present upon opening the
packaging:
• Digital wooden clock: 1 unit.
• User manual: 1 unit.
• USB cable (1 metre): 1 unit.
3. Display Mode Setting:
Press the SET key to switch between display modes:
• DP-1: Time, date, and temperature displayed alternately.
• DP-2: Time displayed only.
4. Temperature Display Format Setting:
Press the UP key to toggle between Celsius (Cº) and Fahrenheit
(ºF).
5. LED Brightness Level Setting:
• Hold the UP key for 3 seconds to enter LED brightness
level settings (default: L3).
• Press the DOWN key to decrease brightness.
• Press the UP key to increase brightness.
• Brightness levels: L1 (dimmest), L2, L3, L4 (brightest).
6. Sound Control Mode Setting:
• Press the DOWN key to enable/disable the sound control
function:
• "on:Sd": Sound control enabled (LED display turns on for 15
seconds and then turns off automatically. To activate, clap, make
noise, or tap the clock).
• "--:Sd": Sound control disabled (display remains permanently on).
7. Display On/Off Setting:
Press the ON/OFF key to toggle the LED display on or off.
8. Resetting:
If errors or malfunctions occur, press the RESET button to restore the
default settings.
8. Main Settings:
Hold the SET key for 2 seconds. The year will flash.
Use the UP or DOWN key to adjust the year, then press SET to
confirm. The month will flash.
Adjust the month and confirm. The day will flash.
Repeat for:
• Date.
• 12-hour or 24-hour format (a dot appears on the top left in
12-hour format during PM).
• Hours and minutes.
For alarms (Alarm 1, Alarm 2, Alarm 3):
• Toggle each alarm ON (display "on:A1") or OFF (display "--:A1").
• Adjust alarm time (hours and minutes) as needed.
Workday Alarm:
Enable ("on:E") or disable ("--:E") workday alarm mode.
•
Power-saving mode:
• Enable (display "on:Sd") or disable (display "--:Sd") using the
UP or DOWN key, then press SET.
9. Precautions:
• Use the clock in a dry area. Wooden housing is not suitable for
humid, vibrating, or high-temperature environments.
• Avoid dropping the clock to prevent damage.
• Ensure the correct 5V/500mA-1000mA AC adapter is used.