Karlsson KA5655 Anleitung

EN | INSTRUCTI MANUAL ALARM CLOCK
ON
KA5655
Before using the product, please remove the battery's plastic
stopper.
1. Features:
Display Modes:
• DP-1: Time, date, and temperature displayed alter-
nately.
• DP-2: Time display only.
• Calendar: From 1st January 2000 to 31st December
2099.
• 12/24-Hour Format Selection: Default mode: 24-hour;
1st January 2016; 12:00.
• Alarms: Set up to three alarms, each lasting 1 minute,
with a sound: "bi bi bi..."
•
Dimmer Display: Automatic dimming from 18:00 to
06:59.
• Brightness Levels: Four levels available (L0 - L1 - L2 -
L3; L3 is the brightest, L0 is the dimmest).
• Temperature Display: Celsius (Cº) or Fahrenheit (ºF).
•
Sound Control Mode (Power-Saving Mode): Turns
display on/off based on sound or touch.
Power Supply:
• 4 x AAA batteries (not included).
• 1 x CR2032 battery (included).
• 1 x USB cable (1 metre included).
Notes:
1. When using batteries only, it is recommended to enable
sound control mode ("on:Sd").
2. The built-in CR2032 battery keeps the internal time
program running, but it does not display externally.
2. Packing List:
Please ensure all items are present upon opening the pack-
aging:
• Digital wooden clock: 1 unit.
• User manual: 1 unit.
• USB cable (1 metre): 1 unit.
3. Display Mode Setting:
Press the SET key to switch between display modes:
• DP-1: Time, date, and temperature displayed alternately.
• DP-2: Time displayed only.
4. Temperature Display Format Setting:
Press the UP key to toggle between Celsius (Cº) and Fahren-
heit (ºF).
5. LED Brightness Level Setting:
Hold the UP key for 3 seconds to enter LED brightness
•
level settings (default: L3).
• Press the DOWN key to decrease brightness.
• Press the UP key to increase brightness.
• Brightness levels: L0 (dimmest), L1, L2, L3 (brightest).
6. Sound Control Mode Setting:
•
Press the DOWN key to enable/disable the sound control
function:
• "on:Sd": Sound control enabled (LED display turns on for 15
seconds and then turns off automatically. To activate, clap,
make noise, or tap the clock).
• "--:Sd": Sound control disabled (display remains permanently
on).
• Note: When using AAA batteries only, sound control mode is
recommended.
7. Resetting:
If errors or malfunctions occur, use a thin object (e.g., a pin) to press
the RESET button to restore default settings.
8. Main Settings:
Hold the SET key for 2 seconds. The year will flash.
Use the UP or DOWN key to adjust the year, then press SET to
confirm. The month will flash.
Adjust the month and confirm. The day will flash.
Repeat for:
• Date.
• 12-hour or 24-hour format (a dot appears on the top left in 12-
hour format during PM).
• Hours and minutes.
For alarms (Alarm 1, Alarm 2, Alarm 3):
• Toggle each alarm ON (display "on:A1") or OFF (display "--
:A1").
• Adjust alarm time (hours and minutes) as needed.
Power-saving mode:
• Enable (display "on:Sd") or disable (display "--:Sd") using the
UP or DOWN key, then press SET.
9. Precautions:
• Use the clock in a dry area. Wooden housing is not suitable for
humid, vibrating, or high-temperature environments.
• Avoid dropping the clock to prevent damage.
• Use high-quality AAA alkaline batteries. If the brightness dims
or blinks, replace the batteries promptly to prevent leakage.
• Ensure the correct 5V/500mA-1000mA AC adapter is used.