8BitD0 SN30 Pro Bedienungsanleitung

8BitD0
SN30 Pro for Android — instruction manual
white status LED
pair power LED
view
d-pad
LSB,LTS
star
Xbox
* press Xbox button to turn on the controller.
* hold Xbox button for 6 seconds to turn off the controller.
Android
* system required:Android9 orabove
Bluetooth Connection
1. press Xbox button to turn on the controller, status LEDstarts to blink.
2. hold pair button for 3 seconds to enter its pairing mode, status LEDstarts to blink rapidly.
(This is required for the very first time only)
3. go to your Android device's Bluetooth setting, pair with [8BitDo SN30 Pro for Android], LEDstays
solid when connection is successful.
Wired Connection
• OTG support is required on your Android device, please contact your device manufacturer for more details.
Connect the controller to the USB port of your Android device, wait till the controller is successfully
recognized by your Android device to play.
AppleO
• requiredsystem: tvOS'16.3smacOS'13.2or above.
Appea_ iPacDSÄ. macOS;. orc traccrna'k± at Apolc Inc.. tcgistvcc ir tnc onc ctrcr
Bluetooth Connection
1. press Xbox button to turn on the controller, status LEDstarts to blink.
2. hold pair button for 3 seconds to enter its pairing mode, status LEDstarts to blink rapidly.
(This is required for the very first time only)
3. go to your Apple device's Bluetooth setting, pair with [8BitDo SN30 Pro for Android].
LEDstays solid when connection is successful.
Button Swap
• LED blinks continuously when the swapped button is pressed.
• the swapped buttons will not be saved after turn off the controller.
• D-Pad, view, menu, LT,RTand Xbox buttons are not supported.
Hold either two buttons you would like to swap, then press the star button to activate/deactivate
the button swap.
Battery
Built-in 480mAh Li-on battery with 16 hours of playtime, rechargeable with 1to 2 hours charging time.
LED indicator -
low battery mode red LED blinks
battery charging green LEDblinks
battery charged green LEDstays solid
• the controller will turn offin 2 minutes with no connection or15 minutes of inactivity when
connected with Bluetooth.
* controller stays onwith USBconnection.
Ultimate Software
it gives you elite control over every piece of your controller: customize button mapping, adjust
stick & trigger sensitivity. Please visit support.8bitdo.com for the application.
• press profile button to activate/deactivate the custom profile. The profile indicator will not light
up when using the default setting.
support
please visitsupport.8bitdo.com for further information & additional support.
8BitD0
SN30 Pro for Android
English
RB,RT
menu
RSB, RTS
profile LED
profile
Xbox
Xbox
Xbox
Android
Android 9.0
1. Xbox h*J1,
3. Android , 8BitDo SN30 Pro for Android
• OTG I)JfiE,
USB Android USB
Apple
iOS 16.3, iPadOS 16.m tvos 16.m macOS 13.2
1. Xbox
3. AppleiQåfi*, 8BitDoSN30Profor Android
480mAh
• 2 15
* app.8bitdo.cn
* support.8bitdo.cn
8BitD0
SN30 Pro for Android
LSB,LTS
Android
Andro idiJVfÄØYÄi-LJ\
3.
IJSB5—-5J —3— EAndroid-FJ VIRØUSB*—
Apple
• 16.3,iPadOS
1-2
support.8bitdo.com
8BitD0
SN30 Pro for Android
power LED RB,RT
RSB, RTS LSB,LTS
Xbox
: Xbox
1271: Xbox
Android
Android
1. Xbox
2.
8BitD0 SN30 3. Android
•
USB
Apple
16.mmacOS • iOS 16.3, iPad OS16.3, tvos 16.3, macOS 13.2
1. Xbox
(Xde
3. Apple
'
480m A h
1-2
*
.
app.8bitdo.comOil
support.8bitdo.comS
#EII
power LED RB,RT
RSB, RTS
BH*I
Xbox
YFSLlch.
9.0 EE-É 01
*RIB,
-SEH
8BitDo SN30 Pro for Android
OTG 71b E-e18}EAlQ
RlßuHES Android CIBh014gl USB
opgel
gH#ßLlC4.
N)
8BitDo SN30 Pro for Android
71b
LT, egal-lc\.
'I-SS BLICK
16 A Q
2B 011401 ?Vdl-h, 15B OILHO*I
BAL-ICY.
Elite gæ, e-3d LT/RT