Boil-Dry Protection; Cleaning And Maintenance - Poco Line Glas Hot-One Bedienungsanleitung

BOIL-DRY PROTECTION

Should you accidentally allow the kettle to operate without
water, the boil-dry protection will automatically switch it off. If
this should occur, allow the kettle to cool before filling with cold
water and reboiling.

CLEANING AND MAINTENANCE

Always disconnect the appliance from the power outlet and
leave it to cool down completely before cleaning. Never
immerse the kettle or cord in water, or allow moisture to contact
with these parts.
Removal of mineral deposits
Mineral deposits in tap water may cause the kettle interior to
discolor. To remove this build-up, use non-toxic Liquid Descaler.
Alternatively:
1. Fill the kettle with 3 cups of white vinegar and the remainder
of water and be allowed to stand overnight. Do not boil.
2. Empty the solution from the kettle. Any stains remaining
inside the spout can be removed by rubbing with a damp cloth,
fill the kettle with clean water, bring to boil and then discard the
water. Repeat and the kettle will then be ready to use.
Cleaning external housing
Wipe the external housing with a damp cloth or cleaner.
CAUTION: Do not use chemical, steel, wooden or abrasive
cleaners to clean the outside of the kettle.
Cleaning the filter
Remember to clean the filter with cloth at intervals.
Storage
When not in use or storage, the power cord may be wound
around the cord storage under the base of kettle.
- 24 -