Shore ROLATV Installationsanleitung Seite 4

1. The TV cabinet does not sync with the projector
1. Make sure the projector is turned on.
2. Ensure all power and connection cables are correctly connected.
3. Use a power bank or mobile phone charger to replace the projector to test if the USB connection is
working properly.
2. The cooling fan does not start
1. Make sure the protective cover of the temperature
2. Ensure the fan is connected
3. The expandable
After adjusting with the remote control, wait for 30 seconds before cutting off the power.
4. The projector cannot fit into the cabinet
The tray of the expandable stand is removable.
1. You can place a power strip inside the middle cabinet so all the power cables can be centralized inside,
making it more elegant.
2. You can use the provided spacers to adjust the floor rising screen, allowing cables to pass underneath.
to USB Extender
stand stops at the incorrect position
Installation
FAQ
sensor has been removed.
2.
Use a screwdriver to remove the tray for more space.
Tips