SPEEDLINK RAIT NX Bedienungsanleitung Seite 4

EN
1. CONNECTION METHODS
1.1. Nintendo Switch*:
Bluetooth*:
From the HOME menu of the console select
"Controllers" and then "Change Grip/Order".
Press and hold the HOME button of the
gamepad for 3 seconds; the LED quickly flashes
green to indicate that the controller is in pairing
mode. Press the R + L button of the controller.
When the LED stops blinking and lights up
green permanently, the connection was
successful.
Note: The controller will stay in pairing for 2.5
minutes and switch off after.
Wired connection:
Connect the controller to the Switch* docking
station using the USB cable. Once connected,
the HOME button will light up green.
1.2. Android* / PC D-Input:
Bluetooth*:
Enter the setting/Bluetooth* menu from your