Crosby SP RLP Bedienungsanleitung Seite 4
DECLARATION OF CONFORMITY
Product: Radio Link Plus RLP
Product Description: Wireless tension Loadcell 1t - 500t capable
dynamic load monitoring. Includes wireless handheld readout.
Constructed from high-quality aerospace grade aluminium that
provides a high strength to weight ratio, and allows the use of a
separate internal sealed enclosure for the load cell's electronic
components, rated to IP67 or NEMA6 environmental.
Supplied with an update rate of 3Hz easily re-configured to run at
speeds of up to 200Hz for dynamic force measurement.
Marking:
Manufacturer: Straightpoint (UK) Limited,
Unit 9, Dakota Park,
Downley Road,
Havant,
Hampshire,
PO9 2NJ, United Kingdom
This conformity is based upon compliance with the application of UK Statutory Instruments (and their amendments) and/or applicable
technical standards'; and, where applicable, or required, UK Notified Body certification.
UK Regulations: The described product above, is in conformity with:
The Supply of Machinery (Safety) Regulations 2008;
The Radio Equipment Regulations 2017;
The RoHS Regulations 2012.
Applicable Designated
The Supply of Machinery (Safety) Regulations 2008
Standards:
EN ISO 12100:2010 Safety of machinery - General principles for design – Risk assessment and risk reduction.
The Radio Equipment Regulations 2017
EN301 489-1 v2.2.3 (2019-11) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services,
Part 1: Common technical requirements;
EN301 489-3 v2.1.2 (2021-03) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services,
Part 3: Specific conditions for Short Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz;
EN301 489-17 v3.2.4 (2020-09) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services,
Part 17: Specific conditions for Broadband Data Transmission Systems;
BS EN 62368-1:2020+A11:2020 Audio/video, information and communication technology equipment. Safety
requirements.
RoHS
EN IEC 63000:2018 Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances.
UK Notified Body: Self-declared.
Quality Management: ISO 9001:2015 Quality Management Systems Requirements: BSI Certificate No. FM 584438
Straightpoint (UK) Limited declare that under our sole responsibility for the manufacture and supply of the product detailed above, that it
conforms to the essential health and safety requirements of the listed applicable UK Regulations and applicable designated technical
Standards.
Technical Information
Straightpoint (UK) Limited,
Available From:
Unit 9, Dakota Park,
Downley Road,
Havant,
Hampshire,
PO9 2NJ, United Kingdom
SQS754 Issue 1
Registered in England
October 2021
Registered
Office:
Unit
of both weighing and
No.
4375389
·
VAT Registered
No.
9.
Dakota Par
k. Down ley
R
d. Havant.
Hampshire P09 2NJ
Signed, on behalf of Straightpoint (UK)
Limited:
Name: Thomas Dietvorst
Position: General Manager
Date: October 20
793 2451 14
·
UK
th
2021
