Cleaning And Maintenance; Troubleshooting Guide - Renpho R-G009 Bedienungsanleitung

Note:
� Do not turn on the device while charging.

CLEANING AND MAINTENANCE

a. Turn off the device before cleaning. Do not rinse the device.
Use a soft cotton cloth dampened with mild detergent to wipe
it clean.
b. Keep away from all corrosive cleaners and harsh detergents.
Keep away from humidity, heat and/or corrosive gas.
c. If the device has not been used for over 3 months, please
recharge it before use.
d. Do not attempt to disassemble the device by yourself.

TROUBLESHOOTING GUIDE

Problem Cause
The device Using improper charger
is not
charging
Loose plug causing poor
contact
The charger or charging
cable is damaged
Didn't turn on the device
Power-on
as instructed
failure
Built-in over-heat protection
is being activated after use
Solution
Please use the DC 5V 1A
charger
Check the connection and
re-insert into the device
Check and replace the
charger or charging cable
if damaged
Press and hold the power
button for 2s to turn on the
device
It is recommended to rest
30mins before resuming
use
EN - 06