Angelbird Performance Card Reader CFexpress B Produkthandbuch Seite 2

How to use the device?
Connecting the Performance Card Reader
1. Use the included cable
Always use the supplied Angelbird USB-C 4.0 cable for optimal
performance.
1
2. Insert memory card
Insert the memory card into the slot, ensuring the correct side
(Angelbird wing logo facing up). You'll hear a click when the card is
properly inserted.
3. Connect the device
Connect the cable to the card reader using the Solid Connect™
recessed USB-C port and then connect the other end to your
device.
4. Safely eject the card reader
Before disconnecting the card reader, always use the "Eject" or
"Safely Remove Hardware" option on your device.
5. Eject the memory card
Gently press the card to eject and pull it out firmly.
LED status indication
The integrated LED indicator on the reader provides real-time
feedback, giving instant feedback about the device's operating
status.
• Orange LED: Reader is powered and ready
• Blue LED: USB 3.2 connection (up to 20 Gb/s) is active
• White LED: USB 4.0 connection (up to 40 Gb/s) is active
• Flashing LED: Data transfer in progress
Installation guide
Introduction
The Angelbird SSD Manager shows a live view of TRIM activity
happening on the disks in your computer. TRIM is a feature
that tells the card reader where it can free up space on the
memory card by finding storage that is no longer in use. This
process optimizes card reader performance and extends the life
expectancy of both, the card reader and the inserted memory
card. Additionally, you can register your Angelbird products
for an extended limited warranty and access the card reader
"Refresh" feature. This allows you to restore the storage capacity
and performance of your recording media back to new. The
separate installation manual contains both detailed installation
instructions, as well as a detailed overview of the SSD Manager
user interface.
Firmware update tool
2
Use this card reader to install firmware updates on your Angelbird
memory card to ensure optimal performance and compatibility.
Warranty
Activate your product within 30 days of purchase. Benefit from
a 3-year limited warranty, extended customer service, and
technical support.
Actual speeds and capacity may vary depending on your system's hardware and
1
configuration. This reader is technically compatible with Thunderbolt 3, 4, and 5 host
devices, operating via USB 4.0 with transfer speeds of up to 40 Gb/s.
Always use the "Safely Remove Hardware" or "Eject" function before disconnecting
2
the card reader. Failure to do so may result in data loss or memory card damage.
Angelbird is not responsible for any loss of user data or product damage resulting
from failure to follow these instructions.
angelbird.com/download/SSDManager
To download the Firmware Update Tool, and for the
installation guide visit angelbird.com/firmware-update
angelbird.com/warranty
If you need additional support, please visit
angelbird.com/support
Hereby, Angelbird Technologies GmbH declares that the radio equipment
type Angelbird CARD READER is in compliance with Directive 2014/53/EU.