VEVOR VV1-10C-US Benutzerhandbuch Seite 12

Troubleshootin & Maintenance
Fault
phenomenon
Completel
y out of
water
Hydro
ponic
The flow
Tower
rate is low.
Water
Quantity
Issue
Uneven
distribution
Smart
The
Plug
smart
Issues
plug is
not
working.
g
Cause of failure
The hose is disconnected from one end
of the water outlet of the water pump.
The water pump is malfunctioning (bypass
the WIFI socket and insert into AC power
to confirm if the water pump is good).
The water pump filter cotton is clogged
(use a flat-head screwdriver to pry open the
front cover of the water pump to confirm).
Five outlets of the water tower are clogged.
Installed on uneven or potholed ground,
causing the entire hydroponic tower to
tilt.
One or more layers of the water tower
were not installed properly, causing it to tilt.
Not correctly connected to WIFI
Unstable network signals may cause
disruption in the water circulation timing.
Smart plug malfunction (completely
unresponsive, unable to connect to
the network).
Test the tube: Connect the power plug to
the tube being tested.
10
Solution
Reassemble
Replace the water pump.
Change the filter pad.
Need to disassemble
and clean.
Adjust the leveling feet
to be level, and after
adjustment, lock the
casters to prevent
slipping.
Adjust the 5 clasps to
the correct position.
The phone and the
socket need to be
connected to the same
network (a
network that requires 4G).
Connect to a
smooth network.
Change the outlet.