Technical Data; Service Centre - Probuilder 16617 Montageanleitung

C2
x2
C3 (L&R)
Workbench with pegboard and shelves
x1
1: (MDF Board)
x2
2: (MDF Boards)
INTRODUCTION
To get the most out of your new product, please read this manual before use. Please also save the manual in case you need to
x1
refer to it at a later date.
ber wood board/18mm)

TECHNICAL DATA

x1
Galvanized steel with 3 shelves and 1 worktop.
Max. load on the two lower shelves and the worktop:
175 kg.
Max. load on the top shelf: 50 kg.
Dimensions: H: 180 x W: 120 x D: 60 cm.
The worktop is treated with clear oil.
x10
We do not recommend treating the MDF shelves.
SAFETY
PRECAUTIONS
x12
To ensure the stability of the workbench, the weight
of the stored items should be distributed evenly
across the 3 shelves.
The workbench should not be placed in a room with
x4
very high humidity as this may damage it.
Tip: For increased safety, use work gloves when
assembling the workbench.
1. Read the user manual and assembly
instructions carefully (see illustrations below)
x2
before assembling and using the workbench.
2. Use the recommended tools and make sure you
use the right safety equipment.
x2
3. Remove all packaging and ensure that all the
parts are present, as shown in the overview.
4. Before assembly, check that the workbench is
not damaged.
3
5. To avoid scratching or otherwise damaging the
workbench during assembly, please assemble
the product on a clean, even surface.
6. For your safety, the assembled workbench
should only be placed on an even, stable
surface.
7. For your safety, ensure that the workbench
is correctly assembled before use. It is
recommended that the workbench is fixed to
the wall for added stability.
(Rainforcement
Bars)
D2
F
(Metal boards)
H
(Drill holder)
J
(Hooks: 9 cm)
L
L1
(Plastic caps)
L2
N
(Metal board
support brace)
P
(Screw sets) M5X10 mm
(M8)
Not included in the product
x2
x2

SERVICE CENTRE

x1
Note: Always quote the product model number in
connection with your enquiry.
The model number is shown on the front of this
manual and on the product rating plate.
When to contact the service centre:
x10
• Complaints
• Spare parts
• Returned goods
• Goods under warranty
x8
• www.schou.com
x2
Manufactured in P.R.C.
Manufacturer:
x1
Schou Company A/S
Nordager 31
6000 Kolding
Denmark
All rights reserved. The contents of this user guide
may not be reproduced in part or whole in any way,
x26
electronically or mechanically, e.g. photocopying
or recording, translated or stored in a database and
retrieval system without the prior written consent of
Schou Company A/S.
30