Remote Control Battery Replacement - Victor Tools P625 Anleitung

Remote control battery replacement

Figure 1
1. Push the A side of the remote control battery compartment to the right (as shown in Figure 3),
then remove the battery compartment (as shown in Figure 2).
2. Insert batteries of the same model into the battery tray, referring to Figure 2 for the positive and negative
terminals.
3. Push the battery tray back into the product.
Motion-activated solar porch light welcomes you with bright, safe light
3 Light Settings:
1. Bright light activates when motion is detected/switches off after 30 seconds when no motion is detected.
2. Constant dim light increases to bright light when motion is detected.
3. Constant bright light.
ALWAYS POSITION THE SOLAR PANEL IN DIRECT SUNLIGHT
WARNINGS AND SAFETY INSTRUCTIONS:
WHEN USING ANY APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED:
•
READ ALL INSTRUCTIONS BEFORE USE.
•
FOR DOMESTIC OUTDOOR USE ONLY.
•
BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE FOUND. TAKE CARE
NOT TO DROP THE APPLIANCE AS HEAVY IMPACTS MAY CAUSE INTERNAL DAMAGE.
•
THE USE OF ANY ACCESSORY OR ATTACHMENTS NOT RECOMMENDED BY COOPERS OF STORTFORD MAY CAUSE
INJURIES AND INVALIDATE ANY WARRANTY YOU MAY HAVE.
•
REPLACE THE BATTERIES IF LEFT FOR LONG PERIODS OR NO LONGER CHARGING.
Figure 2 Figure 3