To Connect Your Device To The Product; App Overview; Operation; To Operate The Light/ Zoom - Meec Tools 029840 Bedienungsanleitung

3.2 To connect your device to the product

Note! The Wi-Fi indicator flashes when the product is ready to connect. When the
connection is complete, the Wi-Fi indicator will light up solidly.
1
Push the power button to start the product. The Wifi indicator will flash.
2
Go to the WiFi setting on your device, connect to "WIFI Camera_******".
3
Open the "Smart Endoscope" app, click on the "+" in the upper right corner of the
screen to add "Wi-Fi Endoscope".
4
When the app asks for access to photos in the mobile device, select "allow
access".

3.3 App overview

Figure 2
A. Rotate image
B. Photo/video screen
C. Take photo/record video
D. Video mode
E. Photo mode
F. Photo/video gallery
G. Screen mirroring
4

Operation

4.1

To operate the light/ zoom

● Adjust light brightness: Push the light/zoom button.
● Zoom: Push and hold the light/zoom button.
5

Storage

● If the product is not going to be used for a long period of time, keep the it in a clean
and dry place, where children and pets do not have access.
EN
SV
NO
DA
PL
DE
FI
FR
NL
4