Vision TC-USBCW Produkthandbuch Seite 4

PAIRING
These devices come paired, but in case you need to re-pair follow these steps. This product is
one-to-one only. One Tx cannot be paired with multiple Rx.
1. Connect Rx to display
2. Connect power to Rx.
3. Turn display on.
4. Press and hold Rx Pair Button for 2 seconds.
Release when display shows "Release the button to pair with Transmitter". The display will
show "Ready to Pair".
5. Connect Tx to source.
6. Press and hold Tx Pair button for 5 seconds.
Release when display shows "Pairing". Once it has paired it will show "Pairing OK".
RESET
Rx: hold Reset button for 10 seconds.
Tx: hold Reset button for 3 seconds.
4